characteristic
- Service Friendly
-
Service Friendly
● Enlarged Thermovent
The cooling area is increased by 20%, coolinge ciency is largely improved, engine can be better protected.
●Integrated Joints
New 24 degree cone & O-ring integrated joint is accordance with ISO standard, reducing the oil leakage rate by 99%, and extending the lifespan by 3 times.
PARAMETER
| Model designation | UNITS | SFD100 |
| Power type:Electric-Diesel-Petrol-LPG-Netw ork Power (Electric) | —— | Diesel |
| Operation Type:Hand-stand on-Driver seated | —— | Seated |
| Load Capacity | Q(kg) | 10000 |
| Load Barycenter Distance | C(mm) | 600 |
| Axle centre to f ork f ace | X(mm) | 700 |
| Wheel Base | Y(mm) | 2800 |
| Weight | ||
| Service Weight | kg | 13200 |
| Axle weight with Rated Load f ront/rear | kg | 21180/2040 |
| Axle weight without Load f ront/rear | kg | 6260/6940 |
| Wheels and tyres | ||
| Tyres:SE-Super elastic PN-Pneumatic | —— | PN |
| Front Tyres Size | —— | 9.00-20/14PR |
| Rear Tyres Size | —— | 9.00-20/14PR |
| Front Track Width | b10(mm) | 1600 |
| Rear Track Width | b11(mm) | 1700 |
| Dimensions and Overall Sizes | ||
| Mast lif t,f orw ard/backw ard | α/β | 6°/12° |
| Mast Minimum Overall Height | h1(mm) | 2760 |
| Free lif t | h2(mm) | 143 |
| Lif t height | h3(mm) | 3000 |
| Mast Maximum Overall Height | h4(mm) | 4545 |
| Overhead Guard Height | h6(mm) | 2567 |
| Seat Height | h7(mm) | 1512 |
| Drawbar Height | h10(mm) | 478 |
| Overall Length | L1(mm) | 5780 |
| Length to Face of Forks | L2(mm) | 4280 |
| Overall Width | b1(mm) | 2175 |
| Fork Arms Dimensions | s/e/L(mm) | 80/160/1500 |
| Fork Carriage in Compliance with ISO 2328 Class/Form A,B | A | |
| Fork Carriage Width | b3(mm) | 2239 |
| Ground Clearance below Mast(with load) | m1(mm) | 215 |
| Ground Clearance Centre of Wheelbase(with load) | m2(mm) | 340 |
| Aisle Width with pallet 1000×1200 and Fork Arms Pitch 1200 | Ast(mm) | 6650 |
| Working aisle width with pallet 800 x 1200 lengthways**** | ||
| Turning Radius | Wa(mm) | 4250 |
| Turning Point Minimum Distance from the Truck Center Line | b13(mm) | 1000 |
| Performance | ||
| Drive Speed with/without load | km/h | 22/28 |
| Lif ting Speed with/without load | mm/s | 340/390 |
| Low ering Speed with/w ithout load | mm/s | 438/276 |
| Draw bar Pull Tractive Ef f ort (at 2km/h) with/without load | KN | 50/45 |
| Gradeability (at 2km/h) with/without load | % | 20 |
| Service Brake | —— | Mechanical/hydra |
| Engine | ||
| Engine Manufacturer/Engine Type | —— | Isuzu 6BG1QC-02/WP4.1G125E302 |
| Engine Pow er in compliance with ISO 1585 | kw | 82.5/92 |
| Rated Number of Revolutions | /min | 2000 |
| Cylinder Number/Displacement | cm³ | 6/6494 |
| Fuel Consumption in Compliance With VDI-Cycl | ||
| On-board voltage | V | 24 |
| Others | ||
| Drive Control Type | —— | Electron Hydraulic |
| Service Pressure f or Attachments | bar | —— |
| Oil Flow rate f or (max.available) | l/min | —— |
| Volume f uel tank | L/kg | 210 |
| Noise at Operator’s Ear | dB(A) | 100 |
| Draw bar,model/Type DIN | —— | Pin |
